Increasing the stability of the articulated lorry at braking by locking the fifth wheel coupling

International Automobile Scientific Forum (IASF-2017) Intelligent Transport Systems

Skotnikov, G.I.^1 ; Jileykin, M.M.^1 ; Komissarov, A.I.^1

Department of Wheeled Vehicles, Bauman Moscow State Technical University, Moscow

105005, Russia^1

关键词: Articulated lorries;    Friction coefficients;    Longitudinal axis;    Loss of stability;    Relative rotation;    Road parameters;    Suspension system;    Wheel couplings;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/315/1/012027/pdf
DOI  :  10.1088/1757-899X/315/1/012027

来源: IOP

【 摘 要 】

The jackknifing of the articulated lorry is determined by the loss of stability with respect to the vertical axis of the fifth wheel coupling, which can be caused by the failure of the brake system, the displacement of the center of mass of the semitrailer or tractor from the longitudinal axis of the vehicle, the road parameters (longitudinal and transverse slopes), the difference in the friction coefficients under the sides of the articulated lorry. In this regard, the issue of creating devices that prevent the jackknifing, and their control systems is important. A method is proposed for maintaining the stability of the movement of articulated lorry when braking both on a straight line and in a turn by blocking the relative rotation of the tractor and the trailer. Blocking occurs due to the creation of a stabilizing moment in the direction opposite to the angular rate of folding. To test the developed algorithm for locking the fifth wheel coupling, a mathematical model of the spatial motion of the articulated lorry was developed, including the models of interaction of an elastic tire with a rigid terrain, suspension systems, transmission, steering, fifth-wheel coupling. The efficiency and effectiveness of the coupling locking control system is proved by comparing the results of the simulation of a straight-line braking and braking in turn. It is shown that the application of the control system significantly increases the stability of the road train.