Influence of turning Treatments on Al6061 by Offline Inspection Technique

International Conference on Advances in Materials and Manufacturing Applications 2017

Annigeri, Ulhas K.^1 ; Sandeep, K.L.G.^1 ; Prasanna Chaitanya, M.^1 ; Sairam Varma, G.^1 ; Arun Datta, B.^1

Department of Mechanical Engineering, Amrita School of Engineering, Bengaluru, Amrita Vishwa Vidyapeetham, Amrita University, India^1

关键词: Depth of cut;    Dominant factor;    Ferrous materials;    Full factorial design;    Off-line inspections;    Pareto charts;    Process treatments;    Turning process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/310/1/012079/pdf
DOI  :  10.1088/1757-899X/310/1/012079

来源: IOP

【 摘 要 】

Aluminium is mostly extracted from bauxite and is frequently being utilised in the manufacture of sea, land and air vehicles. Since, it has the merit of resistance to corrosion it is frequently being used in sea vehicles. Another outstanding merit of aluminium is its weight which is very less compared to other ferrous materials. In our study, we have selected Al6061 as the material and based on full factorial design the surface roughness has been observed with three base parameters speed, feed and depth of cut. A mathematical model has been developed to predict the surface roughness and also the dominant factor affecting the turning process has been determined. The plots such as main effects, interaction and Pareto chart have been analysed to give an effective conclusion to the process followed in the study. The purpose of these experiments to compare the effect of process treatments in all possible pairs to select the best treatment to the process has been done satisfactorily.