Electromagnetic Modelling of MMIC CPWs for High Frequency Applications

10th International Conference Numerical Analysis in Engineering

数学;工业技术

Sinulingga, E.P.^1 ; Kyabaggu, P.B.K.^2 ; Rezazadeh, A.A.^3

Electrical Engineering Department, Universitas Sumatera Utara, Indonesia^1

Bukoola General Enterprises, Kampala, Uganda^2

Elecrical and Electronic Engineering, University of Manchester, United Kingdom^3

关键词: Computer aided designs (CAD);    Electrical characteristic;    Electromagnetic modelling;    Experimental verification;    Fabrication process;    High-frequency applications;    Modelling techniques;    Monolithic microwave integrated circuits (MMIC);   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/308/1/012051/pdf
DOI  :  10.1088/1757-899X/308/1/012051

学科分类：工业工程学

来源: IOP

【 摘 要 】

Realising the theoretical electrical characteristics of components through modelling can be carried out using computer-aided design (CAD) simulation tools. If the simulation model provides the expected characteristics, the fabrication process of Monolithic Microwave Integrated Circuit (MMIC) can be performed for experimental verification purposes. Therefore improvements can be suggested before mass fabrication takes place. This research concentrates on development of MMIC technology by providing accurate predictions of the characteristics of MMIC components using an improved Electromagnetic (EM) modelling technique. The knowledge acquired from the modelling and characterisation process in this work can be adopted by circuit designers for various high frequency applications.