Performance Evaluation of Dual-axis Tracking System of Parabolic Trough Solar Collector

5th Annual International Conference on Material Science and Environmental Engineering

材料科学;生态环境科学

Ullah, Fahim^1 ; Min, Kang^1,2

College of Engineering, Nanjing Agriculture University, Nanjing

210031, China^1

Guanyun Research Institute for Modern Agricultural Equipment, Nanjing Agricultural University, Guanyun

222200, China^2

关键词: Azimuth-elevation;    Dual axis;    Heat collectors;    Parabolic trough solar collectors;    Thermal efficiency;    Tracking errors;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/301/1/012166/pdf
DOI  :  10.1088/1757-899X/301/1/012166

来源: IOP

【 摘 要 】

A parabolic trough solar collector with the concentration ratio of 24 was developed in the College of Engineering; Nanjing Agricultural University, China with the using of the TracePro software an optical model built. Effects of single-axis and dual-axis tracking modes, azimuth and elevating angle tracking errors on the optical performance were investigated and the thermal performance of the solar collector was experimentally measured. The results showed that the optical efficiency of the dual-axis tracking was 0.813% and its year average value was 14.3% and 40.9% higher than that of the eat-west tracking mode and north-south tracking mode respectively. Further, form the results of the experiment, it was concluded that the optical efficiency was affected significantly by the elevation angle tracking errors which should be kept below 0.6o. High optical efficiency could be attained by using dual-tracking mode even though the tracking precision of one axis was degraded. The real-time instantaneous thermal efficiency of the collector reached to 0.775%. In addition, the linearity of the normalized efficiency was favorable. The curve of the calculated thermal efficiency agreed well with the normalized instantaneous efficiency curve derived from the experimental data and the maximum difference between them was 10.3%. This type of solar collector should be applied in middle-scale thermal collection systems.