Casting Molding of PDCPD Material for Purpose of Car's Power Steering Body

5th Annual International Conference on Material Science and Environmental Engineering

材料科学;生态环境科学

Grabowski, L.^1 ; Baier, A.^1 ; Sobek, M.^1

Silesian University of Technology, Faculty of Mechanical Engineering, Institute of Engineering Processes Automation and Integrated Manufacturing Systems, ul. Konarskiego 18a, Gliwice

44-100, Poland^1

关键词: Driver assistance system;    Finished products;    Injection process;    Innovative process;    Load-bearing elements;    Metathesis reactions;    Power steering systems;    Traditional materials;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/301/1/012049/pdf
DOI  :  10.1088/1757-899X/301/1/012049

来源: IOP

【 摘 要 】

The growing industry of polymer and composite materials is facing new challenges posed by the automotive industry. In this industry, traditional materials such as steel and aluminum are widely replaced with plastic materials, including polymers. In the past, such behavior concerned design and interior elements, but more and more often plastics are used in the case of load-bearing elements, i.e. those that require high strength and durability nowadays. This kind of materials are also often used in safety systems or driver assistance systems. Therefore, the aim of the activities described in this article are to carry out an innovative process of injection of cold polymeric material, PDCPD (Polidicyclopentadiene), polymerizing with the use of Metathesis reaction, which in 2005 was awarded the Nobel Prize. This injection applies to the worm gear components of the system, supports the power steering system of the passenger car. Also the process of selecting the appropriate parameters to carry out this process, guaranteeing the best quality of the obtained elements is necessary. The aim of the activities was to achieve a fully useful power steering support system, using a polymer body, which is replacing the aluminum. These activities were aimed at reducing the costs and weight of the final product. The injection process and the way to achieve the finished product were carried out in an innovative way, never used in industry before.