Mass diffusion coefficient measurement for vitreous humor using FEM and MRI

8th TSME-International Conference on Mechanical Engineering

Rattanakijsuntorn, Komsan^1 ; Penkova, Anita^2 ; Sadha, Satwindar S.^2

Faculty of Engineering, Department of Mechanical Engineering, Ubon Ratchathani University, 85 Sathonlamark Road, Warinchamrap, Ubon Ratchathani

34190, Thailand^1

Aerospace and Mechanical Engineering Department, University of Southern California, Los Angeles

CA

90089-1453, United States^2

关键词: 3D finite element model;    Analytical results;    Concentration profiles;    Diethylenetriamine penta-acetic acids;    Diffusion process;    Least square fits;    Mass diffusion coefficients;    MRI contrast agents;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/297/1/012024/pdf
DOI  :  10.1088/1757-899X/297/1/012024

来源: IOP

【 摘 要 】

In early studies, the 'contour method' for determining the diffusion coefficient of the vitreous humor was developed. This technique relied on careful injection of an MRI contrast agent (surrogate drug) into the vitreous humor of fresh bovine eyes, and tracking the contours of the contrast agent in time. In addition, an analytical solution was developed for the theoretical contours built on point source model for the injected surrogate drug. The match between theoretical and experimental contours as a least square fit, while floating the diffusion coefficient, led to the value of the diffusion coefficient. This method had its limitation that the initial injection of the surrogate had to be spherical or ellipsoidal because of the analytical result based on the point-source model. With a new finite element model for the analysis in this study, the technique is much less restrictive and handles irregular shapes of the initial bolus. The fresh bovine eyes were used for drug diffusion study in the vitreous and three contrast agents of different molecular masses: gadolinium-diethylenetriaminepentaacetic acid (Gd-DTPA, 938 Da), non-ionic gadoteridol (Prohance, 559 Da), and bovine albumin conjugated with gadolinium (Galbumin, 74 kDa) were used as drug surrogates to visualize the diffusion process by MRI. The 3D finite element model was developed to determine the diffusion coefficients of these surrogates with the images from MRI. This method can be used for other types of bioporous media provided the concentration profile can be visualized (by methods such as MRI or fluorescence).