Research concerning the balancing of a plane mechanism

9th International Conference on Tribology

Bdoiu, D.^1 ; Petrescu, M.G.^1 ; Antonescu, N.N.^1 ; Toma, G.^1

Petroleum-Gas University of Ploiesti, Department of Mechanical Engineering, Ploiesti

100680, Romania^1

关键词: A-plane;    Component elements;    First harmonic;    Inertia force;    Mechanism-based;    Resultant forces;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/295/1/012016/pdf
DOI  :  10.1088/1757-899X/295/1/012016

来源: IOP

【 摘 要 】

By statically balancing of the plane mechanisms and especially those functioning at high speeds is being pursued the decrease of the value of the resultant force of all inertia forces that work on the component elements, thus obtaining a significant decrease in vibrations and shocks during the functioning. On the other hand, the existence of balancing masses which ensure the balancing of the mechanism leads to increased gauge and its mass. In this paper are presented some possibilities of statically balancing a plane mechanism which is composed of three independent contours. First is analyzed the case when the mechanism is totally balanced. Then a solution is proposed for a partial balancing of the mechanism based on the balancing of the first harmonic of the inertia force developed in a piston of the mechanism. Finally, are presented some simulation results concerning the variation of the value of the resultant inertia force during a cinematic cycle when the mechanism is unbalanced and when it is partially balanced. Also, it is analyzed the variation of the motor moment when the mechanism is unbalanced and when is totally and partially balanced.