Social humanoid robot SARA: development of the wrist mechanism

International Conference on Applied Sciences 2017

Peni, M.^1 ; Rackov, M.^1 ; avi, M.^1 ; Kiss, I.^2 ; Cioat, V.G.^2

University of Novi Sad, Faculty of Technical Sciences, Trg Dositeja Obradovia 6, Novi Sad

21000, Serbia^1

University Politehnica Timisoara, Faculty of Engineering Hunedoara, Revolutiei 5, Hunedoara

331128, Romania^2

关键词: Biologically inspired;    Compact designs;    Gear mechanisms;    High-efficiency;    Positioning accuracy;    Social behaviour;    Variable stiffness;    Wrist mechanism;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/294/1/012079/pdf
DOI  :  10.1088/1757-899X/294/1/012079

来源: IOP

【 摘 要 】

This paper presents the development of a wrist mechanism for humanoid robots. The research was conducted within the project which develops social humanoid robot Sara - a mobile anthropomorphic platform for researching the social behaviour of robots. There are two basic ways for the realization of humanoid wrist. The first one is based on biologically inspired structures that have variable stiffness, and the second one on low backlash mechanisms that have high stiffness. Our solution is low backlash differential mechanism that requires small actuators. Based on the kinematic-dynamic requirements, a dynamic model of the robot wrist is formed. A dynamic simulation for several hand positions was performed and the driving torques of the wrist mechanism were determined. The realized wrist has 2 DOFs and enables movements in the direction of flexion/extension 115°, ulnar/radial deviation ±45° and the combination of these two movements. It consists of a differential mechanism with three spur bevel gears, two of which are driving and identical, while the last one is the driven gear to which the robot hand is attached. Power transmission and motion from the actuator to the input links of the differential mechanism is realized with two parallel placed identical gear mechanisms. The wrist mechanism has high carrying capacity and reliability, high efficiency, a compact design and low backlash that provides high positioning accuracy and repeatability of movements, which is essential for motion control.