Steady operation of the electric drive of pipeline armature in the emergency situation at low ambient temperatures

6th International Conference: Modern Technologies for Non-Destructive Testing

Bordunov, S.V.^1 ; Kuznetsov, V.V.^2 ; Muratov, K.R.^3 ; Zavyalova, O.Yu.^4

Public Corporation Scientific, Innovation Enterprise Echteh, Tomsk, Russia^1

Omsk State Technic University, Omsk, Russia^2

Tyumen Industrial University, Tyumen, Russia^3

Tomsk Polytechnic University, Tomsk, Russia^4

关键词: Emergency situation;    Low ambient temperatures;    Mechanical components;    Microprocessor control system;    Operation algorithm;    PI speed controller;    Transient process;    Working efficiency;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/289/1/012002/pdf
DOI  :  10.1088/1757-899X/289/1/012002

来源: IOP

【 摘 要 】

This scientific work is devoted to the study of the electric drive operation of pipeline armature at low ambient temperatures. Hit of moisture into reducer and rare inclusions in operation of locking regulator are led to curdling lubricant that causes the increased wear of mechanical knots. There is a probability of freezing mechanical components; it leads to emergency situations. The problem of improving working efficiency of the electric drive of shut-off regulating armature at low ambient temperatures of the environment is solved in this work. A simulation model of the GUSAR electric drive was developed to solve this problem. Studies of the simulation model show the need to limit the torque increase rate on a drive motor shaft. The algorithm of setting of PI speed controller to obtain acceptable transient processes is suggested. Recommendations for the use of the algorithm in the microprocessor control system of electric drive are proposed. It is shown that the electric drive operation algorithm with torque increasing limitation on the motor shaft will be smoothly working off the perturbing actions that occur in pipeline armature.