Software and hardware complex for research and management of the separation process

6th International Conference: Modern Technologies for Non-Destructive Testing

Borisov, A.P.^1

Altai State Technical University, Barnaul, Russia^1

关键词: Asynchronous electric drive;    Controlling parameters;    Electromagnetic moments;    Hardware-software complex;    Maximum Efficiency;    Product separation;    Separation process;    Software and hardwares;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/289/1/012039/pdf
DOI  :  10.1088/1757-899X/289/1/012039

来源: IOP

【 摘 要 】

The article is devoted to the development of a program for studying the operation of an asynchronous electric drive using vector-algorithmic switching of windings, as well as the development of a hardware-software complex for controlling parameters and controlling the speed of rotation of an asynchronous electric drive for investigating the operation of a cyclone. To study the operation of an asynchronous electric drive, a method was used in which the average value of flux linkage is found and a method for vector-algorithmic calculation of the power and electromagnetic moment of an asynchronous electric drive feeding from a single-phase network is developed, with vector-algorithmic commutation, and software for calculating parameters. The software part of the complex allows to regulate the speed of rotation of the motor by vector-algorithmic switching of transistors or, using pulse-width modulation (PWM), set any engine speed. Also sensors are connected to the hardware-software complex at the inlet and outlet of the cyclone. The developed cyclone with an inserted complex allows to receive high efficiency of product separation at various entrance speeds. At an inlet air speed of 18 m / s, the cyclone's maximum efficiency is achieved. For this, it is necessary to provide the rotational speed of an asynchronous electric drive with a frequency of 45 Hz.