Polyethersulfone _ barium chloride blend ultrafiltration membranes for dye removal studies

14th International Conference on Science, Engineering and Technology

自然科学;工业技术

Rambabu, K.^1 ; Srivatsan, N.^1 ; Gurumoorthy, Anand V P^1

Department of Chemical Engineering, School of Civil and Chemical Engineering, VIT University, Vellore, Tamil Nadu, 632014, India^1

关键词: Blend ultrafiltration membranes;    Inorganic modifiers;    Membrane characterization;    Morphological study;    Polymer enhanced ultrafiltration;    Rejection efficiency;    Ultra-filtration membranes;    Water permeability;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/263/3/032027/pdf
DOI  :  10.1088/1757-899X/263/3/032027

来源: IOP

【 摘 要 】

A series of Polyethersulfone (PES)-barium chloride (BaCl2) blend ultra filtration membrane was developed by varying the BaCl2concentration in the dope solution. Prepared membranes were subjected to membrane characterization and their performance was studied through dye rejection tests. Morphological studies through SEM and AFM showed that the composite membranes exhibited differences in morphologies, porosities and properties due to the BaCl2addition as compared with pristine PES membrane. Addition of the inorganic modifier enhanced the hydrophilicity and water permeability of the blend membrane system. Polymer enhanced ultrafiltration of dye solutions showed that the proposed blend system had better performance in terms of flux and rejection efficiency than the pure polymer membrane. The performance of the 2 wt% BaCl2blend membrane was more promising for application to real time dye wastewater studies.