Automated turn pike using PLC and SCADA

14th International Conference on Science, Engineering and Technology

自然科学;工业技术

Silpaeedhar, P.^1 ; Aiswarya, P.^1 ; Kathirvelan, J.^1

School of Electronics Engineering, VIT University, Vellore, Tamil Nadu

632014, India^1

关键词: Diversion systems;    Piezo-resistive;    Programmable Logic Controller (PLC);    Remote areas;    SCADA softwares;    Supervisory Control and Data Acquisition (SCADA) systems;    Weight sensors;    Whole process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/263/5/052051/pdf
DOI  :  10.1088/1757-899X/263/5/052051

来源: IOP

【 摘 要 】

We propose a smart turnpike based on Programmable Logic Controller (PLC) and Supervisory Control and Data Acquisition Systems (SCADA) in this paper. In this work, the basic idea is to measure the weight of the vehicles and classify them according to its weight to the respective lanes. It is difficult for the turnpike people to monitor the whole process all the time. So, this PLC based diversion system can be implemented in turnpikes to reduce the difficulties. This method will work based on weight sensors (piezo-resistive) whose output will be fed to a PLC, which will control the vehicle diversion. Using SCADA software, the whole process can be monitored from a remote area. The algorithm developed in this successfully installed in real time system.