2D net shape weaving for cost effective manufacture of textile reinforced composites

17th World Textile Conference AUTEX 2017 - Shaping the Future of Textiles

Vo, D.M.P.^1 ; Kern, M.^1 ; Hoffmann, G.^1 ; Cherif, C.^1

Institute of Textile Machinery and High Performance Material Technology (ITM), TU Dresden, Dresden

01062, Germany^1

关键词: Consolidation process;    Cost effective systems;    Fibre-reinforced polymer composites;    Manufacturing cost;    Preform fabrication;    Resin transfer moldings (RTM);    State of the art;    Textile-reinforced composites;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/254/9/092005/pdf
DOI  :  10.1088/1757-899X/254/9/092005

来源: IOP

【 摘 要 】

Despite significant weight and performance advantages over metal parts, the today's demand for fibre-reinforced polymer composites (FRPC) has been limited mainly by their large manufacturing cost. The combination of dry textile preforms and low-cost consolidation processes such as resin transfer molding (RTM) has been appointed as a promising approach to low-cost FRPC manufacture. At the current state of the art, tooling and impregnation technology is well understood whereas preform fabrication technology has not been developed effectively. This paper presents an advanced 2D net shape weaving technology developed with the aim to establish a more cost effective system for the manufacture of dry textile preforms for FRPC. 2D net shape weaving is developed based on open reed weave (ORW) technology and enables the manufacture of 2D contoured woven fabrics with firm edge, so that oversize cutting and hand trimming after molding are no longer required. The introduction of 2D net shape woven fabrics helps to reduce material waste, cycle time and preform manufacturing cost significantly. Furthermore, higher grade of automation in preform fabrication can be achieved.