LLDPE and Natural Fiber Composites Characterization using AFM

3rd International Conference on Innovative Materials, Structures and Technologies

Zelca, Z.^1 ; Kukle, S.^1 ; Kajaks, J.^2

Institute of Design Technologies, Faculty of Material Science and Applied Chemistry, Riga Technical University, Latvia^1

Department of Polymer Material Technologies, Faculty of Material Science and Applied Chemistry, Riga Technical University, Latvia^2

关键词: Crystalline formation;    Filler modifications;    Interfacial modifiers;    Matrix modifiers;    Natural fiber composites;    Surface-modified;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/251/1/012086/pdf
DOI  :  10.1088/1757-899X/251/1/012086

来源: IOP

【 摘 要 】

The research is focused on the characterization of matrix and filler adhesion, interfacial modifier effects on matrix crystalline formation with filler, depending on the filler modification strategies. Natural fiber filled linear low density polyethylene (LLDPE) composites made from surface modified hemp fiber and waste, zinc oxide, using matrix modifier were prepared by two rolls mill and characterize by Atomic Force Microscope (AFM).