Control Method Stretches Suspensions by Measuring the Sag of Strands in Cable-Stayed Bridges

World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium - WMCAUS

土木建筑工程

Btkowski, Piotr^1

Silesian University of Technology, ul. Akademicka 5, Gliwice

44-100, Poland^1

关键词: Analytical formulas;    Control measurements;    Controlled parameter;    Direct measurement;    Monitoring device;    Parametric relationships;    Suspension cables;    Uncertainty estimation;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/245/2/022037/pdf
DOI  :  10.1088/1757-899X/245/2/022037

学科分类：土木及结构工程学

来源: IOP

【 摘 要 】

In the article is described the method that allows on evaluation and validation of measurement correctness of dynamometers (strain gauges, tension meters) used in systems of suspensions. Control of monitoring devices such as dynamometers is recommended in inspections of suspension bridges. Control device (dynamometer) works with an anchor, and the degree of this cooperation could have a decisive impact on the correctness of the results. Method, which determines the stress in the strand (cable), depending on the sag of stayed cable, is described. This method can be used to control the accuracy of measuring devices directly on the bridge. By measuring the strand sag, it is possible to obtain information about the strength (force) which occurred in the suspension cable. Digital camera is used for the measurement of cable sag. Control measurement should be made independently from the controlled parameter but should verify this parameter directly (it is the best situation). In many cases in practice the controlled parameter is not designation by direct measurement, but the calculations, i.e. relation measured others parameters, as in the method described in the article. In such cases occurred the problem of overlapping error of measurement of intermediate parameters (data) and the evaluation of the reliability of the results. Method of control calculations made in relation to installed in the bridge measuring devices is doubtful without procedure of uncertainty estimation. Such an assessment of the accuracy can be performed using the interval numbers. With the interval numbers are possible the analysis of parametric relationship accuracy of the designation of individual parameters and uncertainty of results. Method of measurements, relations and analytical formulas, and numerical example can be found in the text of the article.