Review of the Air-Coupled Impact-Echo Method for Non-Destructive Testing

World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium - WMCAUS

土木建筑工程

Nowotarski, Piotr^1 ; Dubas, Sebastian^1 ; Milwicz, Roman^1

Poznan University of Technology, Institute of Structural Engineering, Piotrowo 5, Poznan

61-138, Poland^1

关键词: Accuracy algorithms;    Air-coupled sensors;    Impact echo methods;    Laboratory conditions;    Non destructive testing;    Recent researches;    State of the art;    Universal solutions;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/245/3/032098/pdf
DOI  :  10.1088/1757-899X/245/3/032098

学科分类：土木及结构工程学

来源: IOP

【 摘 要 】

The article presents the general idea of Air-Coupled Impact-Echo (ACIE) method which is one of the non-destructive testing (NDT) techniques used in the construction industry. One of the main advantages of the general Impact Echo (IE) method is that it is sufficient to access from one side to that of the structure which greatly facilitate research in the road facilities or places which are difficult to access and diagnose. The main purpose of the article is to present state-of-the-art related to ACIE method based on the publications available at Thomson Reuters Web of Science Core Collection database (WOS) with the further analysis of the mentioned methods. Deeper analysis was also performed for the newest publications published within last 3 years related to ACIE for investigation on the subject of main focus of the researchers and scientists to try to define possible regions where additional examination and work is necessary. One of the main conclusions that comes from the performed analysis is that ACIE methods can be widely used for performing NDT of concrete structures and can be performed faster than standard IE method thanks to the Air-coupled sensors. What is more, 92.3% of the analysed recent research described in publications connected with ACIE was performed in laboratories, and only 23.1% in-situ on real structures. This indicates that method requires further research to prepare test stand ready to perform analysis on real objects outside laboratory conditions. Moreover, algorithms that are used for data processing and later presentation in ACIE method are still being developed and there is no universal solution available for all kinds of the existing and possible to find defects, which indicates possible research area for further works. Authors are of the opinion that emerging ACIE method could be good opportunity for ND testing especially for concrete structures. Development and refinement of test stands that will allow to perform in-situ tests could shorten the overall time of the research and with the connection of implementation of higher accuracy algorithms for data analysis better precision of defects localization can be achieved.