Flaw Inspection of Aluminum Pipes by Non-Contact Visualization of Circumferential Guided Waves using Laser Ultrasound Generation and an Air-Coupled Sensor

3rd International Symposium on Laser Ultrasonics and Advanced Sensing

Urabe, K.^1 ; Takatsubo, J.^2 ; Toyama, N.^1 ; Yamamoto, T.^1 ; Tsuda, H.^1

National Institute of Advanced Science and Technology, 1-1-1 Umezono, Tsukuba 305-8568, Japan^1

Tsukuba Technology Co. Ltd., Plaza214, 2-1-6 Sengen, Tsukuba 305-0047, Japan^2

关键词: Air-coupled sensors;    Air-coupled ultrasounds;    Circumferential guided wave;    Laser scanning systems;    Laser ultrasound;    Non-contact;    Scanning area;    Ultrasound propagation;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/520/1/012009/pdf
DOI  :  10.1088/1742-6596/520/1/012009

来源: IOP

【 摘 要 】

Our group had previously proposed a generation laser scanning system for visualizing ultrasound propagation on an object as an animate image, which provided visible and quick flaw inspection. Recently, we improved this system to make it completely non-contact by employing an air-coupled ultrasound transducer as a receiver instead of a contact transducer, and demonstrated the successful visualization of Lamb waves propagating on aluminum and carbon fiber reinforced plastic plates, as well as the detection of flaws. In this research, we applied this system to the non-contact visualization of circumferential guided waves on aluminum pipes. It was shown that circumferential guided waves propagating in opposite directions could be visualized separately, and that a flaw such as a slit or thinning on the inside surface of the pipe could be successfully detected even when it existed outside the scanning area.