Design of 120t converter furnace body

2017 3rd International Conference on Applied Materials and Manufacturing Technology

Li, Xiang^1 ; Tang, Biao^1

School of Materials Science and Engineering, Jiamusi University, Jiamusi

154007, China^1

关键词: Converter design;    Effective volume;    Empirical formulas;    High productivity;    Matching equipment;    Oxygen converter steelmaking;    Practical production;    Production process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/242/1/012073/pdf
DOI  :  10.1088/1757-899X/242/1/012073

来源: IOP

【 摘 要 】

At present, the oxygen converter steelmaking equipment of large-scale, production of continuous and high-speed, which has achieved a high productivity, and this requires matching equipment to complete together. The process about the layout of these equipment and the workshop of various materials must be reasonable in order to enable the production to proceed smoothly. The furnace body for 120t converter is designed in the paper. The results are as follows. The converter raw data has been used, the experimental step of the design has been listed to determine the data required for the furnace size design, including the steel yield, scrap ratio, furnace type, etc. The size of the data has been obtained by the calculation, and, check the results to determine the design of the furnace for the specific data according to the empirical formula of the size of the calibration, the data can be used for practical production. Through the rigorous calculation of the design, the converter furnace capacity ratio, aspect ratio, pool diameter and depth of experimental data have been determine. The results show that the design is reasonable. The design data of the converter and the corresponding furnace can meet the equipment of the effective volume of 120t converter design. That can ensure the smooth production process of the converter, while achieve the requirements of lining longevity.