Different load types modeling using MatLab

International Scientific-technical Conference on Innovative Engineering Technologies, Equipment and Materials 2016

工业技术;机械制造;材料科学

Metelev, I.S.^1 ; Dvorkin, D.V.^2 ; Isakov, R.G.^1

Kazan National Research Technical University Named after A.N. Tupolev, Kazan, Russia^1

Otto-von-Geuricke University, Magdeburg, Germany^2

关键词: Active power;    Calculated values;    Load type;    Non-sinusoidal;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/240/1/012051/pdf
DOI  :  10.1088/1757-899X/240/1/012051

来源: IOP

【 摘 要 】

Schemes with balanced, imbalanced and non-sinusoidal loads were modelled in MatLab in this paper. Verification (comparison of calculated values and measured) were done for active power (with difference less than 5%). There was a power phases inequality before transformer and after it.