The effect of microstructure on abrasive wear of steel

1st Nommensen International Conference on Technology and Engineering

Kener, A.^1 ; Chotëborský, R.^1 ; Linda, M.^2

Department of Material Science and Manufacturing Technology, Czech University of Life Sciences Prague, Kamýcká 129, 165 21, Czech Republic^1

Department of Electrical Engineering and Automation, Czech University of Life Sciences Prague, Kamýcká 129, 165 21, Czech Republic^2

关键词: Effect of the microstructures;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/237/1/012040/pdf
DOI  :  10.1088/1757-899X/237/1/012040

来源: IOP

【 摘 要 】

Abrasive wear of agricultural tools is one of the biggest problems in currently being. The amount of abrasive wear, depending on the microstructure, has been investigated in this work. Steels 25CrMo4 and 51CrV4 were used in this work to determine the effect of the microstructure on the abrasive wear. These steels are commonly used for components that have to withstand abrasive wear.SEM analysis was used to detect the microstructure. The standardized ASTM G65 method was used to compare the abrasive wear of steels. The results show that the abrasive wear depends on the microstructure of steels.