Dependence of the microstructure and microhardness of the AA2024-O alloy on the thermal and mechanical action on the weld during friction stir welding

Open School-Conference of NIS Countries Ultrafine Grained and Nanostructured Materials

Karmanov, V.V.^1 ; Kameneva, A.L.^1

Department of Innovative Technologies of Mechanical Engineering, Perm National Research Polytechnic University, 29 Komsomolsky pr., Perm

614990, Russia^1

关键词: AA2024 alloy;    Axial forces;    Constant speed;    Effect of the microstructures;    Heat input;    Mechanical action;    Microhardness and microstructure;    Weld zone;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/447/1/012058/pdf
DOI  :  10.1088/1757-899X/447/1/012058

来源: IOP

【 摘 要 】

The microstructure of the weld from the AA2024 alloy is highly dependent on the heat input in the weld, and therefore it is necessary to understand the relationship between these characteristics to improve the mechanical properties of the weld. The effect of the microstructure in various zones of the weld on its microhardness has been ascertained. The structure of various weld zones was studied depending on the heat input to the weld. Therefore, the experiment was performed at different values of the external axial force and the values of the constant speed of the rotation of the tool and welding. The dependence of the microhardness and microstructure of the weld zones on the temperature gradient in both normal and traverse directions has been established.