Research on Noise Reduction of Reed Valves of a Hermetic Refrigerator Compressor

10th International Conference on Compressors and their Systems

He, Zhilong^1 ; Chen, Qian^1 ; Li, Dantong^1 ; Wang, Ju^2 ; Xia, Pu^3 ; Wang, Tao^1

Xi'An Jiaotong University, Xi'an, China^1

Nanjing Engineering Institute of Aircraft Systems, Nanjing, China^2

Carrier SRDC, Shanghai, China^3

关键词: Aerodynamic noise;    Doped diamond-like carbon;    Noise;    Noise reduction technologies;    P-V diagrams;    Reed valves;    Standard test method;    Surface characteristics;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/232/1/012014/pdf
DOI  :  10.1088/1757-899X/232/1/012014

来源: IOP

【 摘 要 】

The noise level of the refrigerator compressor has received more and more attention in recent years. As the key component of a compressor, reed valve is its main noise source. In this paper, a new noise reduction technology of coating on reed valve surface is proposed and verified by experiments. Firstly, the reed valves were coated, and their surface characteristics were checked. Then, the refrigerator compressor p-V diagram test was carried out to investigate the influence of doped diamond-like carbon (DLC) coating on power consumption. Finally, the noise test rig for the refrigerator compressor was set up. Based on the standard test method, noise spectrum was measured in a semi-anechoic room under standard working condition. Research results showed that the compressor noise was significantly reduced by 1.8dB (A) after coating. Moreover, the effect of aerodynamic noise reduction at suction side is better than that at discharge side. However, the influence of the film thickness on noise reduction value is little. The COP was reduced by 0.6% as compared to the compressor with uncoated reed valves.