Spot Welding of Honeycomb Structures

5th ModTech International Conference - Modern Technologies in Industrial Engineering

Cohal, V.^1

Gheorghe Asachi Technical University of Iasi, Department of Machine Manufacturing Technology, Blvd. Mangeron No. 59A, Iasi

700050, Romania^1

关键词: Corrugated sheets;    Hexagonal cells;    Three electrode;    Tooth profile;    Waterjet cutting;    Welding device;    Welding point;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/227/1/012029/pdf
DOI  :  10.1088/1757-899X/227/1/012029

来源: IOP

【 摘 要 】

Honeycomb structures are used to prepare meals water jet cutting machines for textile. These honeycomb structures are made of stainless steel sheet thickness of 0.1-0.2 mm. Corrugated sheet metal strips are between two gears with special tooth profile. Hexagonal cells for obtaining these strips are welded points between them. Spot welding device is three electrodes in the upper part, which carries three welding points across the width of the strip of corrugated sheet metal. Spot welding device filled with press and advance mechanisms. The paper presents the values of the regime for spot welding.