Defining a procedure for predicting the duration of the approximately isothermal segments within the proposed drying regime as a function of the drying air parameters

5th ModTech International Conference - Modern Technologies in Industrial Engineering

Vasi, M.^1 ; Radojevi, Z.^1

Institute for Testing of Materials, Bulevar vojvode Miia 43, Belgrade

1100, Serbia^1

关键词: Characteristic point;    Drying air temperatures;    Factorial experimental design;    Isothermal experiments;    Isothermal segments;    Limiting values;    Moisture migration;    Output parameters;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/227/1/012134/pdf
DOI  :  10.1088/1757-899X/227/1/012134

来源: IOP

【 摘 要 】

One of the main disadvantages of the recently reported method, for setting up the drying regime based on the theory of moisture migration during drying, lies in a fact that it is based on a large number of isothermal experiments. In addition each isothermal experiment requires the use of different drying air parameters. The main goal of this paper was to find a way how to reduce the number of isothermal experiments without affecting the quality of the previously proposed calculation method. The first task was to define the lower and upper inputs as well as the output of the "black box" which will be used in the Box-Wilkinson's orthogonal multi-factorial experimental design. Three inputs (drying air temperature, humidity and velocity) were used within the experimental design. The output parameter of the model represents the time interval between any two chosen characteristic points presented on the Deff - t. The second task was to calculate the output parameter for each planed experiments. The final output of the model is the equation which can predict the time interval between any two chosen characteristic points as a function of the drying air parameters. This equation is valid for any value of the drying air parameters which are within the defined area designated with lower and upper limiting values.