Non isothermal drying process optimisation - Drying of clay tiles

Modern Technologies in Industrial Engineering 2015

Vasi, M.^1 ; Radojevi, Z.^1

Institute for Testing of Materials, Bulevar vojvode Miia 43, Belgrade

11000, Serbia^1

关键词: Drying mechanism;    Effective diffusivities;    Isothermal drying;    Isothermal experiments;    Non-isothermal process;    Nonisothermal;    Temperature and humidities;    Transition point;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/95/1/012025/pdf
DOI  :  10.1088/1757-899X/95/1/012025

来源: IOP

【 摘 要 】

In our previous studies we have developed a model for determination of the variable effective diffusivity and identification of the exact transition points between possible drying mechanisms. The next goal was to develop a drying regime which could in advance characterize the real non isothermal process of drying clay tiles. In order to do this four isothermal experiments were recorded. Temperature and humidity were maintained at 350C / 75%; 450C / 70%; 450C / 60% and 500C / 60%; respectively in each experiment. All experimentally collected data were analyzed and the exact transition points between possible drying mechanisms were detected. Characteristic drying period (time) for each isothermal drying mechanism was also detected. The real, non-isothermal drying process was approximated by 5 segments. In each of these segments approximately isothermal drying condition were maintained. Temperature and humidity of the drying air, in the first four segments, was maintained on the same level as in recorded isothermal experiments while in the fifth segment, it were maintained at 700C / 40%. The duration of the first four segments were calculated from the diagrams Deff - t respectively for each experiment. The clay tile in experiment five was dried without cracking using the proposed non isothermal drying regime..