Aeronautical requirements for Inconel 718 alloy

International Conference on Innovative Research - ICIR Euroinvent 2017

Elefterie, C.F.^1 ; Guragata, C.^1 ; Bran, D.^1 ; Ghiban, B.^1

University Politechnica of Bucharest, Splaiul Independenei no. 313, district 6, Bucharest, Romania^1

关键词: Advanced manufacturing;    Aviation components;    Environmental factors;    Inconel 718 alloy;    Industrial pollution;    Manufacturing process;    Mechanical characteristics;    Ni-based superalloys;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/209/1/012060/pdf
DOI  :  10.1088/1757-899X/209/1/012060

来源: IOP

【 摘 要 】

The project goal is to present the requirements imposed by aviation components made from super alloys based on Nickel. A significant portion of fasteners, locking lugs, blade retainers and inserts are manufactured from Alloy 718. The thesis describes environmental factors (corrosion), conditions of external aggression (salt air, intense heat, heavy industrial pollution, high condensation, high pressure), mechanical characteristics (tensile strength, yield strength and fatigue resistance) and loadings (tensions, compression loads) that must be satisfied simultaneously by Ni-based super alloy, compared to other classes of aviation alloys (as egg. Titanium alloys, Aluminum alloys). For this alloy the requirements are strength durability, damage tolerance, fail safety and so on. The corrosion can be an issue, but the fatigue under high-magnitude cyclic tensile loading it's what limits the lifetime of the airframe. Also, the excellent malleability and weldability characteristics of the 718 system make the material physical properties tolerant of manufacturing processes. These characteristics additionally continue to provide new opportunities for advanced manufacturing methods.