A comparison of the two approaches of the theory of critical distances based on linear-elastic and elasto-plastic analyses

Winter School on Continuous Media Mechanics

Terekhina, A.I.^1 ; Plekhov, O.A.^1 ; Kostina, A.A.^1 ; Susmel, L.^2

Institute of Continuous Media Mechanics UB RAS, Acad. Korolev St. 1, Perm

614013, Russia^1

Department of Civil and Structural Engineering, University of Sheffield, Sheffield

S1 3JD, United Kingdom^2

关键词: Elasto-plastic analysis;    Elastoplastic materials;    Electromechanical testing;    Engineering structures;    Linear elastic analysis;    Stress concentrators;    Stress strain state;    Theory of critical distances;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/208/1/012042/pdf
DOI  :  10.1088/1757-899X/208/1/012042

来源: IOP

【 摘 要 】

The problem of determining the strength of engineering structures, considering the effects of the non-local fracture in the area of stress concentrators is a great scientific and industrial interest. This work is aimed on modification of the classical theory of critical distance that is known as a method of failure prediction based on linear-elastic analysis in case of elasto-plastic material behaviour to improve the accuracy of estimation of lifetime of notched components. Accounting plasticity has been implemented with the use of the Simplified Johnson-Cook model. Mechanical tests were carried out using a 300 kN electromechanical testing machine Shimadzu AG-X Plus. The cylindrical un-notched specimens and specimens with stress concentrators of titanium alloy Grade2 were tested under tensile loading with different grippers travel speed, which ensured several orders of strain rate. The results of elasto-plastic analyses of stress distributions near a wide variety of notches are presented. The results showed that the use of the modification of the TCD based on elasto-plastic analysis gives us estimates falling within an error interval of ±5-10%, that more accurate predictions than the linear elastic TCD solution. The use of an improved description of the stress-strain state at the notch tip allows introducing the critical distances as a material parameter.