Development of friction material by using precast prefired (pcp f) blocks

Frontiers in Automobile and Mechanical Engineering

Dineshkumar, R.^1 ; Ramanamurthy, E.V.V.^1 ; Krishnapavanteja, Ch^1

Department of Mechanical Engineering, Sathyabama University, Chennai

119, India^1

关键词: Asbestos brakes;    Automobile systems;    Braking system;    Fused PCPF Block;    Kinematic energy;    PCPF Block;    Pin on disc;    Powder compacting;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/197/1/012001/pdf
DOI  :  10.1088/1757-899X/197/1/012001

来源: IOP

【 摘 要 】

The braking system used to control and stop automobile system. The braking system converts the kinematic energy into heat energy by friction. The performance of the brake pad depends on composition of friction materials. The asbestos brake pads are carcinogenic nature and it makes so many health problems. The present research work is going to replacement of asbestos by new materials. The new material is made by fused ceramic materials from industrial wastage. In this study the industrial waste are recycled and conducted the suitable test to compare the performance of the new material with existing brake pad material. The wear test was conducted by pin on disc experiment. The non asbestos, nonfused, fused samples are represented by x1, x2 and x3. The new brake pad material is formed by non fused and fused ceramic materials. The brake pads are manufactured by powder compacting process.