Investigation of Machine-ability of Inconel 800 in EDM with Coated Electrode

International Conference on Emerging Trends in Engineering Research

工业技术;材料科学

Karunakaran, K.^1 ; Chandrasekaran, M.^1

Department of Mechanical Engineering, Vels University, Chennai, TN, India^1

关键词: Coated electrodes;    Copper electrodes;    Full factorial design;    Machine ability;    Material removal rate;    Nickel- based superalloys;    Research focus;    Tool wear rate;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/183/1/012014/pdf
DOI  :  10.1088/1757-899X/183/1/012014

来源: IOP

【 摘 要 】

The Inconel 800 is a high temperature application alloy which is classified as a nickel based super alloy. It has wide scope in aerospace engineering, gas Turbine etc. The machine-ability studies were found limited on this material. Hence This research focuses on machine-ability studies on EDM of Inconel 800 with Silver Coated Electrolyte Copper Electrode. The purpose of coating on electrode is to reduce tool wear. The factors pulse on Time, Pulse off Time and Peck Current were considered to observe the responses of surface roughness, material removal rate, tool wear rate. Taguchi Full Factorial Design is employed for Design the experiment. Some specific findings were reported and the percentage of contribution of each parameter was furnished.