Dry Sliding Wear Behaviour of Micro oven Treated Fly Ash Reinforced Epoxy Composite using ExtendedTaguchi Approach Optimization

National Conference on Processing and Characterization of Materials

Pattanaik, A.^1 ; Bhyan, S.K.^2 ; Mishra, S.C.^2 ; Patro, S.S.^3 ; Behera, Ajit^2

Department of Mechanical Engineering, C v Raman College of Engineering, Bhubaneswar, India^1

Department of Metallurgical and Materials Engineering, National Institute of Technology, Rourkela, India^2

Department of Mechanical Engineering, CVRCE, Bhubaneswar, India^3

关键词: Hazardous wastes;    Influencing parameters;    Parametric conditions;    Reinforced epoxy;    Resistance properties;    Single objective optimization;    TOPSIS;    Ultrasonic mixing;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/178/1/012004/pdf
DOI  :  10.1088/1757-899X/178/1/012004

来源: IOP

【 摘 要 】

Fly ash epoxy composite has been developed in ultrasonic mixing method with the aim of reducing the impact of hazardous waste like fly ash on the environment. Post curing has been done in micro oven to modify the surface so as to have better wear resistance properties. An orthogonal array, L32has been designed with the influencing parameters like % fly ash, applied normal load, speed, track diameter and time of operation. A multi objective parametric condition, TOPSIS is used to convert it into a single objective optimization technique and ANOVA helps in getting the percentage contribution of each parameter for the wear of the material. In general, this article emphasizes the importance of micro oven treatment on the surface modification of polymeric material which retards the wear.