Impurities Removal in Seawater to Optimize the Magnesium Extraction

International Conference on Advanced Materials for Better Future 2016

Natasha, N.C.^1 ; Firdiyono, F.^1 ; Sulistiyono, E.^1

Research Center of Metallurgy and Materials, LIPI, Puspiptek Gedung

470, Indonesia^1

关键词: Calcium oxalates;    Dissolving process;    ICP analysis;    Impurities in;    Impurities removal;    Inductively coupled plasma (ICP);    Solution concentration;    XRD analysis;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/176/1/012039/pdf
DOI  :  10.1088/1757-899X/176/1/012039

来源: IOP

【 摘 要 】

Magnesium extraction from seawater is promising way because magnesium is the second abundant element in seawater and Indonesia has the second longest coastline in the world. To optimize the magnesium extraction, the impurities in seawater need to be eliminated. Evaporation and dissolving process were used in this research to remove the impurities especially calcium in seawater. Seawater which has been evaporated from 100 ml to 50 ml was dissolved with variations solution such as oxalic acid and ammonium bicarbonate. The solution concentration is 100 g/l and it variations are 2 ml, 4 ml, 6 ml, 8 ml, 10 ml, 20 ml, 30 ml, 40 ml and 50 ml. This step will produce precipitate and filtrate then it will be analysed to find out the result of this process. The precipitate was analysed by X-ray Diffraction (XRD) and Scanning Electron Microscope (SEM) but the filtrate was analysed by Inductively Coupled Plasma (ICP). XRD analysis shows that calcium oxalate and calcium carbonate were formed and ICP analysis shows that the remaining calcium in seawater using oxalic acid is about 0.01% and sodium 0.14% but when using ammonium bicarbonate the remaining calcium is 2.5% and sodium still more than 90%. The results show that both oxalic acid and ammonium bicarbonate can remove the impurities but when using oxalic acid, not only the impurities but also magnesium was precipitated. The conclusion of this research is the best solution to remove the impurities in seawater without precipitate the magnesium is using ammonium bicarbonate.