Evaluating lubricating capacity of vegetal oils using Abbott-Firestone curve

13th International Conference on Tribology

Georgescu, C.^1 ; Cristea, G.C.^1 ; Dima, C.^1 ; Deleanu, L.^1

Department of Mechanical Engineering, Dunrea de Jos, University of Galai, Str. Domneasc 47, Galai, Romania^1

关键词: Average values;    Functional parameters;    Lubricant properties;    Profile heights;    Rapeseed oil;    Reliable methods;    Test parameters;    Testing conditions;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/174/1/012057/pdf
DOI  :  10.1088/1757-899X/174/1/012057

来源: IOP

【 摘 要 】

The paper presents the change of functional parameters defined on the Abbott-Firestone curve in order to evaluate the surface quality of the balls from the four ball tester, after tests done with several vegetable oils. The tests were done using two grades of rapeseed oil (degummed and refined) and two grades of soybean oil (coarse and degummed) and a common transmission oil (T90). Test parameters were 200 N and 0.576 m/s (1500 rpm) for 60 minutes. For the refined rapeseed oil, the changes in shape of the Abbott-Firestone curves are more dramatic, these being characterized by high values of Spk (the average value for the wear scars on the three balls), thus being 40% of the sum Svk + Sk + Spk, percentage also obtained for the soybean oil, but the value Spk being lower. For the degummed soybean oil, the profile height of the wear scars are taller than those obtained after testing the coarse soybean oil, meaning that the degumming process has a negative influence on the worn surface quality and the lubricating capacity of this oil. Comparing the surface quality of the wear scars on fixed tested balls is a reliable method to point out the lubricant properties of the vegetable oils, especially if they are compared to a "classical" lubricant as a non-additivated transmission mineral oil T90. The best surface after testing was obtained for the soybean oil, followed by T90 oil and the degummed grades of the soybean oil and rapeseed oil (these three giving very close values for the functional parameters), but the refined rapeseed oil generated the poorest quality of the wear scars on the balls, under the same testing conditions.