Influence of tooth profile on the noncircular gear tooth contact

13th International Conference on Tribology

Cristescu, A.^1 ; Andrei, L.^1 ; Cristescu, B.^1

Department of Mechanical Engineering Dunrea de Jos, University of Galai, Domneasca 47, Romania^1

关键词: Complex geometries;    Contact analysis;    Continuous modification;    Graphical approach;    Non-circular gears;    Path of contacts;    Pressure angles;    Standard procedures;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/174/1/012005/pdf
DOI  :  10.1088/1757-899X/174/1/012005

来源: IOP

【 摘 要 】

With noncircular gears, the continuous modification of the tooth meshing, in terms of variation of the tooth profiles and the line of action position and inclination, makes difficult the implementation of a general standard procedure for the analysis of the noncircular gears tooth contact. In this paper, the authors present a graphical approach that enables the tooth contact static pattern to be produced and evaluated in case of a noncircular gear with complex geometry of the pitch curve. The study is virtually developed, in AutoCAD environment, by animating and investigating the gear solid models in mesh. The tooth static contact analysis enables the path of contact area and distribution to be evaluated in correlation with the following variable initial data: gear pitch curve geometry, tooth profile geometry, as a consequence of different generating procedures, and the gear pressure angle. It was found out that the noncircular gear tooth contact could be improved by choosing different procedures for the tooth flank generation in concave and convex zones and by increasing the gear pressure angle.