Thermal stability of brushite with chitosan samples

7th International Conference Radiation-thermal Effects and Processes in Inorganic Materials

材料科学;物理学

Chikanova, E.S.^1 ; Golovanova, O.A.^1 ; Malikova, T.V.^1 ; Kuimova, M.V.^2

F.M. Dostoevsky State University, 55A Prospekt Mira, Omsk

644077, Russia^1

National Research Tomsk Polytechnic University, 30 Lenin Avenue, Tomsk

634050, Russia^2

关键词: Average size;    Chitosan samples;    Composite powders;    Dissolution rates;    FTIR spectroscopy;    Isotonic solution;    Organic additives;    Single phase;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/168/1/012066/pdf
DOI  :  10.1088/1757-899X/168/1/012066

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

In this paper, the powders of brushite from an aqueous solution of Ca(NO3)2- (NH4)2HPO4with different content of chitosan were synthesized. XRD data revealed that all samples are single-phase and are brushite (CaHPO4•2H2O). By FT-IR spectroscopy and BET methods, it was found that chitosan adsorbs onto the surface of powders. With increase of the content of the additive, the average size of crystallites increases 4.0 - 4.8 - 11.8 μm, respectively, and the dissolution rate in isotonic solution also decreases. The thermal stability of the composite powders was studied. It was established that the highest destruction of samples occurs in the range 473-673 K by removing of adsorption and crystallization water and partial change of the structure of the mineral and chitosan. At a temperature of 873 K, carbonization of the organic additive occurs.