An investigation on the fracture of linkage connecting wing flap of aircraft

1st International Conference on New Material and Chemical Industry

材料科学;化学工业

Feng, Yanpeng^1 ; Tang, Haijun^1 ; Wang, Chun^1 ; Shu, Ping^1 ; Ma, Xiaoming^1 ; Li, Chunguang^1

Analysis and Appraisal Lab of Civil Aviation Safety, China Academy of Civil Aviation Science and Technology, Beijing, China^1

关键词: Bending deflection;    Failure process;    Fracture structures;    Fracture surfaces;    Mechanical components;    Optical micrographs;    Scanning electron micrographs;    Stability analysis;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/167/1/012029/pdf
DOI  :  10.1088/1757-899X/167/1/012029

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Linkage that connected wing flap and supports was found broken several times during from 2011 to 2014. Flights data was check, no heavy landing or exceed limiting speed warning were found. To investigate the root cause of the failure process, macroscopic and micrograph of the fracture surface were research with optical micrograph and scanning electron micrograph. Results show that the surface of fracture was dimples and shearing fracture structure which mean transient breaking features. Nearby the fracture, a lot of scratch and paint marks were found, that indicated that the rod may collapsed by impacted with some mechanical components. But the distance to the nearest component is within the tolerance, during ground inspection. Basing on stability analysis of column, the linkage will be bending deflection with elastic deformation, when compress exceed a critical value, which decrease the distance. But it will be recovered, during ground inspection for lower compress. Finite Element methods were used to demonstrate the bending deformation too. Basing on the reports and analysis, enhanced linkages were provided and substituted for older versions, and the relevant incidents were never found.