Research on the rolling moment in the symmetrical and asymmetrical rolling process

International Conference on Applied Sciences 2016

Alexa, V.^1 ; Raiu, S.A.^1 ; Kiss, I.^1 ; Cioat, C.G.^1

Politehnica University of Timisoara, Department Engineering and Management, 5 Revolution Street, Hunedoara

331128, Romania^1

关键词: Asymmetrical rolling;    Experimental facilities;    Laminate samples;    Metallic material;    Research results;    Rolling cylinder;    Safety equipments;    Single cylinders;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/163/1/012047/pdf
DOI  :  10.1088/1757-899X/163/1/012047

来源: IOP

【 摘 要 】

Research distribution the rolling moments symmetrical and asymmetrical report presents great importance both in theory and to introduce clarifications to the calculation of rolling resistance line assemblies. Clarifying individuals of metallic material deformation between the rolls single cylinder diameters act of any difference of work and analysis of advance and delay phenomena. Torque drive value for each of the rolling cylinders was done by reducing the thickness of the laminate samples, an experimental facility located in the laboratory of plastic deformation of the Faculty of Engineering Hunedoara. The analysis of research results show that in terms of power consumption for deformation and safety equipment in operation is rational for mills which require such a difference between the work rolls to execute about one cylinder operated.