Mechanical characterization of coir/palmyra waste fiber hybrid composites

4th AEROTECH- Innovation in Aerospace Engineering and Technology

航空航天工程

Arumugaprabu, V.^1 ; Uthayakumar, M.^1 ; Cardona, F.^2 ; Sultan, M.T.H.^2

Department of Mechanical Engineering, Kalasalingam University, India^1

Aerospace Manufacturing Research Centre (AMRC), Universiti Putra Malaysia, Serdang, Malaysia^2

关键词: Coir fibers;    High strength;    Hybrid composites;    Mechanical characterizations;    Research focus;    Waste fibers;    Weight percentages;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/152/1/012054/pdf
DOI  :  10.1088/1757-899X/152/1/012054

学科分类：航空航天科学

来源: IOP

【 摘 要 】

In the present days, the utilization of palmyra fiber in automotive and aerospace applications has increased drastically due to its high strength and low weight. This research focuses on the development of composite materials using palmyra waste and coir fiber with polyester as a matrix. The mechanical properties such as tensile, flexural and impact strength of composites were investigated. Palmyra waste fiber and coir fiber with relative varying weight percentage in the ratio of 50:50, 40:60, 30:70 and 20:80 had been considered for the study. The composites were prepared by the compression moulding method. In addition, the prepared composites were subjected to moisture studies for 24 hours, 48 hours and 72 hours to know the composite resistance to water absorption. The results showed an increase in all the mechanical properties from the addition of palmyra waste. After analysing the results obtained from the study, a suitable application in the automobile and aerospace industries is suggested for the new developed composite.