Design and Analysis of a Forging Die for Manufacturing of Multiple Connecting Rods

International Conference on Advances in Materials and Manufacturing Applications 2016

Megharaj, C.E.^1 ; Nagaraj, P.M.^1 ; Pasha, K. Jeelan^1

Department of Industrial Engineering and Management, Siddaganga Institute of Technology, Tumakuru, India^1

关键词: Analysis tools;    Deform-3d;    Design and analysis;    Design modelling;    Material Flow;    Solid Edge;    STL file format;    Validation process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/149/1/012145/pdf
DOI  :  10.1088/1757-899X/149/1/012145

来源: IOP

【 摘 要 】

This paper demonstrates to utilize the hammer capacity by modifying the die design such that forging hammer can manufacture more than one connecting rod in a given forging cycle time. To modify the die design study is carried out to understand the parameters that are required for forging die design. By considering these parameters, forging die is designed using design modelling tool solid edge. This new design now can produce two connecting rods in same capacity hammer. The new design is required to validate by verifying complete filing of metal in die cavities without any defects in it. To verify this, analysis tool DEFORM 3D is used in this project. Before start of validation process it is require to convert 3D generated models in to. STL file format to import the models into the analysis tool DEFORM 3D. After importing these designs they are analysed for material flow into the cavities and energy required to produce two connecting rods in new forging die design. It is found that the forging die design is proper without any defects and also energy graph shows that the forging energy required to produce two connecting rods is within the limit of that hammer capacity. Implementation of this project increases the production of connecting rods by 200% in less than previous cycle time.