A case study on relation between roughness, lubrication and fatigue life of rolling bearings

7th International Conference on Advanced Concepts in Mechanical Engineering

Balan, M.R.^1 ; Tufescu, A.^1 ; Cretu, S.S.^1

Mechanical Engineering, Mechatronics and Robotics Department, Gheorghe Asachi Technical University of Iasi, Iasi, Romania^1

关键词: Contacting surfaces;    Fatigue limit stress;    Good Manufacturing Practices;    Lubrication regimes;    Operating temperature;    Rolling contact fatigue;    Roughness amplitude;    Von Mises equivalent stress;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/147/1/012013/pdf
DOI  :  10.1088/1757-899X/147/1/012013

来源: IOP

【 摘 要 】

A spherical roller bearing under high radial loading, constant speed and imposed roughness for the contacting surfaces was chosen as case study. Different lubrication regimes were obtained by varying oil viscosity through the operating temperature. For bearings with especially machined contacting surfaces, λ-ratio is firstly determined and its value is used to estimate the particular value of the lubrication parameter κ. Using the λ-ratio approach the paper reveals the relationship between roughness amplitude and the modified rating life of rolling bearings. The roughness values corresponding to good manufacturing practice are possible to be determined for each particular case. Three groups of random Gaussian roughness were generated with the same values for the Ra parameter as used in the modified lives investigations. For medium and especially high radial loads, the contacts between rough surfaces develop, inside the shallow layer, von Mises equivalent stresses higher than the fatigue limit stress. For condition of lack of lubricant or starved lubrication, these findings explain the initiation of the rolling contact fatigue in the shallow layer, close to contacting surfaces.