Controlling the type and the form of chip when machining steel

7th International Scientific Practical Conference "Innovative Technologies in Engineering"

Gruby, S.V.^1 ; Lasukov, A.A.^1,2 ; Nekrasov, R.Yu^3 ; Politsinsky, E.V.^1 ; Arkhipova, D.A.^2

Moskow State Technical University by N.E. Bauman, ul. Baumanskaya 2-ya, 5/1, Moscow

105005, Russia^1

Yurga Institute of Technology, TPU Affiliate, 26, Leningradskaya street, Yurga

652050, Russia^2

Tyumen State Oil and Gas University, 38, Volodarskogo street, Tyumen

625000, Russia^3

关键词: Chip formations;    Factors of production;    Machined surface;    Machining steels;    Structural steels;    Tool surfaces;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/142/1/012065/pdf
DOI  :  10.1088/1757-899X/142/1/012065

来源: IOP

【 摘 要 】

The type of the chip produced in the process of machining influences many factors of production process. Controlling the type of chip when cutting metals is important for producing swarf chips and for easing its utilization as well as for protecting the machined surface, cutting tool and the worker. In the given work we provide the experimental data on machining structural steel with implanted tool. The authors show that it is possible to control the chip formation process to produce the required type of chip by selecting the material for machining the tool surface.