Effect of Rake Angle and Feed Rate on Chip Segmentation in Machining Carbon Steel 1050

International Conference on Recent Advances in Industrial Engineering and Manufacturing

工业技术（总论）

Zamri, M.F.^1 ; Yusoff, A.R.^1

Faculty of Manufacturing Engineering, Universiti Malaysia, Pahang, Malaysia^1

关键词: Chip breakers;    Chip formations;    Cutting conditions;    Cutting speed;    Machined surface;    Machining Process;    Segmented chips;    Turning process;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/530/1/012011/pdf
DOI  :  10.1088/1757-899X/530/1/012011

学科分类：工业工程学

来源: IOP

【 摘 要 】

A chip breaker plays an essential role for chip breaking as well as to enhance productivity and quality during the turning process. However, chip break as a tool is not able to break the chip and formulate continuous chip, that in turn, causes the tool to wear and the generate excessive heat. These affect the quality of the machined surface. Chip formation is influenced by cutting conditions and tool geometries such as spindle speed, feed rate, depth of cut and rake angle. In this study, experiments were carried out on carbon steel 1050 with chip breaker at a constant cutting speed of 275 m/mm with a depth of cut 0.9 mm. The effect of different feed rate and rake angle towards chip length formation were also investigated in the present investigation. The results obtained from the study indicates that segmented chips could be obtained at a feed rate of 0.4 mm/rev and a rake angle of -9°. Therefore, it could be concluded that the feed rate and rake angle can play a significant role in the formation of the segmented chip through the use of a chip breaker to enhance the productivity and quality in the machining process.