Determination of mode-I cohesive strength for interfaces

37th Risø International Symposium on Materials Science

Jørgensen, J.B.^1 ; Thouless, M.D.^2 ; Sørensen, B.F.^3 ; Kildegaard, C.^1

LM Wind Power, Østre Alle 1, Lunderskov

6640, Denmark^1

University of Michigan, 3672 G. G. Brown Addition, Ann Arbor

MI, United States^2

Technical University of Denmark, Dept. of Wind Energy, Frederiksborgvej 399, Roskilde

4000, Denmark^3

关键词: 2d digital image correlations;    Cohesive strength;    Controlling crack;    Governing parameters;    Interface crack;    Linear elastic;    Single edge notches;    Test specimens;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/139/1/012025/pdf
DOI  :  10.1088/1757-899X/139/1/012025

来源: IOP

【 摘 要 】

The cohesive strength is one of the governing parameters controlling crack deflection at interfaces, but measuring its magnitude is challenging. In this paper, we demonstrate a novel approach to determine the mode-I cohesive strength of an interface by using a 4-point single-edge-notch beam specimen. The test specimen is made of a glue cast onto a unidirectional, glass-fiber laminate. A crack is cut in the glue, orthogonal to the interface, which creates a high normal stress across the glue/laminate interface during loading. It is observed that a new crack can be initiated along the interface in response to this stress, before the main crack starts to grow. Observations using 2D digital-image correlation showed that an ''apparent" strain across the interface initially increases linearly with the applied load, but becomes nonlinear upon the initiation of the interface crack. The cohesive strength is determined, using a 2D, linear-elastic, finite-element model of the experiment, as the stress value where the experimental measured 'apparent" strain value becomes non-linear across the interface.