The application of additive technologies in creation a medical simulator-trainer of the human head operating field

International Scientific-technical Conference on Innovative Engineering Technologies, Equipment and Materials 2015

工业技术;机械制造;材料科学

Kashapov, L.N.^1 ; Kashapov, N.F.^1 ; Kashapov, R.N.^1,2,3 ; Pashaev, B.Y.^3

Engineering Institute, Kazan Federal University, Kazan

420008, Russia^1

Laboratory of Radiation Physics, Kazan Physical-Technical Institute, Kazan Scientific Center, Russian Academy of Sciences, Kazan

420029, Russia^2

Kazan State Medical University, Kazan

420012, Russia^3

关键词: Additive manufacturing technology;    Additive technology;    Fused deposition modeling;    Manufacturing process;    Medical simulators;    Operating fields;    Real properties;    Selective laser sintering;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/134/1/012011/pdf
DOI  :  10.1088/1757-899X/134/1/012011

来源: IOP

【 摘 要 】

The aim of the work was to determine the possible application of additive manufacturing technology during the manufacturing process as close as possible to reality of medical simulator-trainers. In work were used some additive manufacturing technologies: selective laser sintering (SLS), fused deposition modeling (FDM), binder Jetting. As a result, a prototype of simulator-trainer of the human head operating field, which based on the CT real patient, was manufactured and conducted its tests. It was found that structure, which is obtained with the use of 3D-printers ProJet 160, most appropriate and closest to the real properties of the bone.