Analysis of the thermo-mechanical deformations in a hot forging tool by numerical simulation

International Conference on Materials, Processing and Product Engineering 2015

Cancelos, R.L.^1 ; Varas, F.^2 ; Martín, E.^3 ; Viéitez, I.^2

Departamento de Ingeniería de Los Materiales, Mecánica Aplicada y Construcción, E. de Ing. Industrial, Universidad de Vigo, Campus Marcosende, Vigo

E-36310, Spain^1

Departamento de Matemática Aplicada II, E. de Ing. de Telecomunicación, Universidad de Vigo, Campus Marcosende, Vigo

E-36310, Spain^2

Departamento de Ingenieria Mecanica, Maquinas y Motores Termicos y Fluidos, E. de Ing. Industrial, Universidad de Vigo, Campus Marcosende, Vigo

E-36310, Spain^3

关键词: Degree of confinement;    Dimensional quality;    Experimental test;    Manufacturing process;    Material resources;    Mechanical behaviour;    Thermomechanical deformations;    Thermomechanical model;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/119/1/012021/pdf
DOI  :  10.1088/1757-899X/119/1/012021

来源: IOP

【 摘 要 】

Although programs have been developed for the design of tools for hot forging, its design is still largely based on the experience of the tool maker. This obliges to build some test matrices and correct their errors to minimize distortions in the forged piece. This phase prior to mass production consumes time and material resources, which makes the final product more expensive. The forging tools are usually constituted by various parts made of different grades of steel, which in turn have different mechanical properties and therefore suffer different degrees of strain. Furthermore, the tools used in the hot forging are exposed to a thermal field that also induces strain or stress based on the degree of confinement of the piece. Therefore, the mechanical behaviour of the assembly is determined by the contact between the different pieces. The numerical simulation allows to analyse different configurations and anticipate possible defects before tool making, thus, reducing the costs of this preliminary phase. In order to improve the dimensional quality of the manufactured parts, the work presented here focuses on the application of a numerical model to a hot forging manufacturing process in order to predict the areas of the forging die subjected to large deformations. The thermo-mechanical model developed and implemented with free software (Code-Aster) includes the strains of thermal origin, strains during forge impact and contact effects. The numerical results are validated with experimental measurements in a tooling set that produces forged crankshafts for the automotive industry. The numerical results show good agreement with the experimental tests. Thereby, a very useful tool for the design of tooling sets for hot forging is achieved.