A meshless approach to thermomechanics of DC casting of aluminium billets

4th International Conference on Advances in Solidification Processes

材料科学;物理学

Mavri, B.^1 ; Šarler, B.^1,2

Institute of Metals and Technology, Lepi pot 11, Ljubljana

SI-1000, Slovenia^1

University of Nova Gorica, Vipavska 13, Nova Gorica

SI-5000, Slovenia^2

关键词: Displacement interpolation;    Linear thermal expansions;    Multiquadric radial basis function;    Overlapping sub-domains;    Second order convergence;    System of linear equations;    Technological challenges;    Thermomechanical model;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/117/1/012032/pdf
DOI  :  10.1088/1757-899X/117/1/012032

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

The ability to model thermomechanics in DC casting is important due to the technological challenges caused by physical phenomena such as different ingot distortions, cracking, hot tearing and residual stress. Many thermomechanical models already exist and usually take into account three contributions: elastic, thermal expansion, and viscoplastic to model the mushy zone. These models are, in a vast majority, solved by the finite element method. In the present work the elastic model that accounts for linear thermal expansion is considered. The method used for solving the model is of a novel meshless type and extends our previous meshless attempts in solving fluid mechanics problems. The solution to the problem is constructed using collocation on the overlapping subdomains, which are composed of computational nodes. Multiquadric radial basis functions, augmented by monomials, are used for the displacement interpolation. The interpolation is constructed in such a manner that it readily satisfies the boundary conditions. The discretization results in construction of a global square sparse matrix representing the system of linear equations for the displacement field. The developed method has many advantages. The system of equations can be easily constructed and efficiently solved. There is no need to perform expensive meshing of the domain and the formulation of the method is similar in two and three dimensions. Since no meshing is required, the nodes can easily be added or removed, which allows for efficient adaption of the node arrangement density. The order of convergence, estimated through an analytically solvable test, can be adjusted through the number of interpolation nodes in the subdomain, with 6 nodes being enough for the second order convergence. Simulations of axisymmetric mechanical problems, associated with low frequency electromagnetic DC casting are presented.