Influence of forced convection on solidification and remelting in the developing mushy zone

4th International Conference on Advances in Solidification Processes

材料科学;物理学

Wu, M.^1,2 ; Vakhrushev, A.^1 ; Ludwig, A.^2 ; Kharicha, A.^1,2

Christian-Doppler Lab for Adv. Process Simulation of Solidification and Melting, University of Leoben, Franz-Josef-Str. 18, Leoben

A-8700, Austria^1

Drpartment of Simulation and Modeling of Metallurgical Processes, University of Leoben, Franz-Josef-Str. 18, Leoben

A-8700, Austria^2

关键词: Dissipation rates;    Interaction phenomena;    Semi-solids;    Shell formation;    Solid shells;    Solidification fronts;    Submerged entry nozzles;    Transition regions;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/117/1/012045/pdf
DOI  :  10.1088/1757-899X/117/1/012045

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

The mushy zone and solid shell formed during solidification of a continuous casting are mostly uneven, and this unevenness of shell growth might lead to surface defects or breakout. One known example is the unevenness of shell growth at the impingement point between the jet flow (coming from submerged entry nozzle) and the solidification front. This phenomenon is primarily understood as the local remelting caused by the superheat of the melt, which is continuously brought by the jet flow towards the solidification front. A recent study of the authors [Metall. Mater. Trans. B, 2014, in press] hinted that, in addition to the aforementioned superheat-induced local remelting (1), two other factors also affect the shell growth. They are (2) the advection of latent heat in the semi-solid mushy zone and (3) the enhanced dissipation rate of energy by turbulence in the bulk-mush transition region. This paper is going to perform a detailed numerical analysis to gain an insight into the flow-solidification interaction phenomena. Contributions of each of the above factors to the shell formation are compared.