Methodology on Investigating the Influences of Automated Material Handling System in Automotive Assembly Process

2nd International Manufacturing Engineering Conference; 3rd Asia-Pacific Conference on Manufacturing Systems

Saffar, Seha^1 ; Jafar, Fairul Azni^2 ; Jamaludin, Zamberi^2

Centre for Graduate Studies, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, Durian Tunggal, Melaka

76100, Malaysia^1

Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, Durian Tunggal, Melaka

76100, Malaysia^2

关键词: ANOVA analysis;    Automated material handling systems;    Automotive assemblies;    CAD softwares;    Data gathering;    Full factorial design;    Integration systems;    Principles of design;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/114/1/012053/pdf
DOI  :  10.1088/1757-899X/114/1/012053

来源: IOP

【 摘 要 】

A case study was selected as a method to collect data in actual industry situation. The study aimed to assess the influences of automated material handling system in automotive industry by proposing a new design of integration system through simulation, and analyze the significant effect and influence of the system. The method approach tool will be CAD Software (Delmia & Quest). The process of preliminary data gathering in phase 1 will collect all data related from actual industry situation. It is expected to produce a guideline and limitation in designing a new integration system later. In phase 2, an idea or concept of design will be done by using 10 principles of design consideration for manufacturing. A full factorial design will be used as design of experiment in order to analyze the performance measured of the integration system with the current system in case study. From the result of the experiment, an ANOVA analysis will be done to study the performance measured. Thus, it is expected that influences can be seen from the improvement made in the system.