Evaluation of Surface Roughness and Power Consumption in Machining FCD 450 Cast Iron using Coated and Uncoated Irregular Milling Tools

2nd International Manufacturing Engineering Conference; 3rd Asia-Pacific Conference on Manufacturing Systems

Yusoff, Ahmad Razlan^1 ; Arsyad, Fitriyanti^1

Faculty of Manufacturing Engineering, University Malaysia Pahang, Pekan, Pahang

26600, Malaysia^1

关键词: Coated tools;    Cutting parameters;    Evaluation of surface roughness;    Machining productivity;    Machining time;    Milling tools;    Minimum surface roughness;    Spindle speed;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/114/1/012017/pdf
DOI  :  10.1088/1757-899X/114/1/012017

来源: IOP

【 摘 要 】

In this project, the effects of different cutting parameters on surface roughness and power consumption when machining FCD450 cast iron were studied using coated and uncoated irregular milling tool geometry of variable helix and pitch. Their responses on roughness and power consumption were evaluated based on the spindle speed, feed rate, and depth of cut, machining length and machining time. Results showed that except spindle speed and machining length, other parameters such as feed rate, axial and radial depth of cut and also machining time proportionate with surface roughness. The power consumption proportionately increase for all cutting parameters except feedrate. It is showed that the average decrement 27.92 percent for surface roughness and average decrement 9.32 percent for power consumption by using coated compared to uncoated tool. Optimum cutting parameters for both minimum surface roughness and power consumption can be determined. The coated tools performed better than uncoated milling tools for responses of surface roughness and power consumption to increase machining productivity and profit.