A comparative study on performance of CBN inserts when turning steel under dry and wet conditions

4th International Conference on Mechanical Engineering Research

Bagaber, Salem Abdullah^1 ; Yusoff, Ahmad Razlan^1

Faculty of Manufacturing Engineering, Universiti Malaysia Pahang, Pekan, Pahang

26600, Malaysia^1

关键词: Boxbehnken design (BBD);    Cubic boron nitride (cBN);    Dry and wet conditions;    High strength and corrosion resistances;    Machining parameters;    Machining productivity;    Performance indices;    Response surface methodology;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/257/1/012041/pdf
DOI  :  10.1088/1757-899X/257/1/012041

来源: IOP

【 摘 要 】

Cutting fluids is the most unsustainable components of machining processes, it is negatively impacting on the environmental and additional energy required. Due to its high strength and corrosion resistance, the machinability of stainless steel has attracted considerable interest. This study aims to evaluate performance of cubic boron nitride (CBN) inserts for the machining parameters includes the power consumption and surface roughness. Due to the high single cutting-edge cost of CBN, the performance of significant is importance for hard finish turning. The present work also deals with a comparative study on power consumption and surface roughness under dry and flood conditions. Turning process of the stainless steel 316 was performed. A response surface methodology based box-behnken design (BBD) was utilized for statistical analysis. The optimum process parameters are determined as the overall performance index. The comparison study has been done between dry and wet stainless-steel cut in terms of minimum value of energy and surface roughness. The result shows the stainless still can be machined under dry condition with 18.57% improvement of power consumption and acceptable quality compare to the wet cutting. The CBN tools under dry cutting stainless steel can be used to reduce the environment impacts in terms of no cutting fluid use and less energy required which is effected in machining productivity and profit.