Linear Resonance Compressor for Stirling-Type Cryocoolers Activated by Piezoelectric Stack-Type Elements

Cryogenic Engineering Conference 2015

材料科学;物理学

Sobol, S.^1 ; Grossman, G.^1

Technion - Israel Institute of Technology, Haifa, Israel^1

关键词: Composite diaphragm;    Cryogenic applications;    Governing parameters;    Linear compressors;    Magnetic field interference;    Mechanical resonance;    Piezoelectric stack;    Pulse tube cryocoolers;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/101/1/012093/pdf
DOI  :  10.1088/1757-899X/101/1/012093

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

A novel type of a PZT- based compressor operating at mechanical resonance, suitable for pneumatically-driven Stirling-type cryocoolers was developed theoretically and built practically during this research. A resonance operation at relatively low frequency was achieved by incorporating the piezo ceramics into the moving part, and by reducing the effective piezo stiffness using hydraulic amplification. The detailed concept, analytical model and the test results of the preliminary prototype were reported earlier and presented at ICC17 [2]. A fine agreement between the simulations and experiments spurred development of the current actual compressor designed to drive a miniature Pulse Tube cryocooler, particularly our MTSa model, which operates at 103 Hz and requires an average PV power of 11 W, filling pressure of 40 Bar and a pressure ratio of 1.3. The paper concentrates on design aspects and optimization of the governing parameters. The small stroke to diameter ratio (about 1:10) allows for the use of a composite diaphragm instead of a clearance-seal piston. The motivation is to create an adequate separation between the working fluid and the buffer gas of the compressor, thus preventing possible contamination in the cryocooler. Providing efficiency and power density similar to those of conventional linear compressors, the piezo compressor may serve as a good alternative for cryogenic applications requiring extreme reliability and absence of magnetic field interference.